Used Meat Equipment

Stock# 52248001

Used Griffith 1500 lb Stainless Steel Dual Shaft Ribbon Blender, Model G-37.5/2. The blender sits on 4- 5,000 lb hermetically sealed load cells. Open top with stainless steel safety grates, Dual end bottom hydraulic discharge doors. Driven by (2) 7.5 HP, 3/60/230-460 volt motors. Last use to mix ground beef and pork for hotdog and sausage production.

Stock# 53121003

Used Wolfking Meat Grinder, Model B400-HD, 304 Stainless Steel. Trough 47" wide x 50" long x 18" deep. Carbon Steel Crushing screw approximately 16" diameter x 52" long. Driven by an approximate 200 HP (149kW) 3/60/460 volt, 1785 rpm motor. 14" Diameter die plate with 3/8" diameter holes. Mounted on frame with casters.. Serial# 62226.

Stock# 53146001

Used Maja Meat Slicer, Model FP100. Stainless steel. Cuts 40-130 slices per minute. The maximum cutting thickness is 23.4" (600 mm). Driven by a 19 KW-400Volt/50Cycle/3PH Motor. Overall dimensions 67" (2060 mm) long x 45" (1380 mm) width x 61" (1850 mm) high. Weight 1.5 tonnes. Serial # 45585.

Stock# 53230001

Used Dx Industrial Slicer, Series DX 1000. 7" Wide x 4" High x 18" Long Product Feed. up to 300-600 slices per minute. Previously used for ham and turkey.

Stock# 53474001

Used Vemag Double Screw Vaccum Filler, Model Robot HP15C. Up to 14,000 kg (approximate 31,000 lbs) per hour filling rate; Built-in Handtmann loader; Approximate 3" diameter carbon steel screws; Double screws driven by a 15 kW motor; mounted on legs. Reported to be refurbished.

Stock# 53921001

Used Seydelmann K 324 AC8 VAK Vacuum Cook Bowl Chopper. Like New and used approximately 5 hrs in production. All stainless steel construction, 325 liter bowl capacity, 6 programmable knife speeds, 2 reverse mixing speeds, 2 bowl speeds, hydraulic left hand loader, hydraulic right hand unloader, hydraulic vacuum lid and noise cover, 188 HP motor, Auto-Command 1000 control panel with 21.5" LED color display, up to 30 programs, 460V/3PH/60HZ. 293 AMPS. Requires 4-6 bar water, 6-10 bar compressed air, .5-1.0 bar steam.

Stock# 53921002

Unused- SEYDELMANN Model K-504 AC-8 VAK Vacuum-Cooking-Cutter. Year: 2023, all stainless steel construction, 500 liter bowl capacity, 6 programmable knife speeds, 2 reverse mixing speeds, 2 bowl speeds, hydraulic left hand loader, hydraulic right hand unloader, hydraulic vacuum lid and noise cover, 265 HP motor, Auto-Command 1000 control panel with 21.5" LED color display, up to 30 programs, 460V/3PH/60HZ. 293 AMPS. Requires 4-6 bar water, 6-10 bar compressed air, .5-1.0 bar steam.

Stock# 53084001

Used Seydelmann Bowl Cutter / Chopper, Model K504-VA-U-V. 500 Liter capacity. Vacuum and Cook capacity. Steam connection 120 - 150 kg/h. All stainless steel construction. Multi speed Bowl and knives. Main drive motor 180kW, 1800rpm. Includes control panel and LS IS SV1600iS7-4SOD variable speed drive. Full set of knives, Left-hand Loader and Right-hand unloader. Hydraulic power pack. 480V/3Phase/60Hz.

Stock# 42051001

Used Meincke Two Roll Extruder/Expander. Model G426-404, Type GL-30. (2) Approximate 6'' diameter rolls, Stainless Steel. Dual drive, one for feed rolls, one for cutting die plate with control panel. Unit requires hopper and die plate. Includes dual AC Moog servo drives, Model G426-404, type GL-30.

Stock# 52980008

Used Weiler Meat Grinder, Model 16D, Stainless Steel. Approximate 10" diameter x 36" long screw, tp hopper, 16" diameter plate. Driven by a 100hp motor. Includes spare parts, and control panel with SSW soft starter. Serial# 97-1005.

Stock# 53121006

Used Wolfking Model B400-HD Meat Grinder, 304 Stainless Steel. Trough 17" wide x 52" long x 20" deep. Carbon Steel Crushing screw approximately 12" diameter x 54" long. Driven by a 200 HP (149kW) 3/60/460 volt, 1785 rpm motor. 14" Diameter die plate with 5/16" diameter holes. Mounted on frame with casters. Serial# 62227.

Stock# 53847001

Used Marel Portion Cutter, Model I-Cut 55. Belt speed of 40-500 mm per second; Up to 600 cuts per minute. Maximum weight accuracy with 360 degree laser scanning. Quick-release open knife guide. Max. product length 950 mm. Max. product width 300mm. Max. product height 180 mm (with holder). Benefits of Marel Software for I-Cut Portion Cutters: Real-time monitoring and control; Data collection gives insight to optimize portioning process; Cutting programs easily shared between multiples devices; Enhances traceability and quality assurance. Large top-hinged doors provide easy access for cleaning and maintenance. Conveyor belts can be removed for inspection and cleaning, without using tools. The joint item technique and boundary detection system prevent products moving backwards while being cut.

Stock# 44381001

Used Bridge Machine Patty Former, Model 240, 304 Stainless Steel. Approximately 21,600 patties per hour. Top self-feeding hopper with paddles and agitators. Bottom mould plate with approximate 4" x 4-1/2" oval patty die. Requires belt for discharge, Driven by a 5 hp, 3/60/230/460 volt, 1730 rpm motor. Mounted on casters.

Stock# 53175001

Used Vemag Robot 500 Vacuum Stuffer with PC 878 Controls and 821 Meatball Head Former. High torque drive vacuum feed system; 110 litre hopper; Modified inlet; 4" guillotine cut-off; Oil cooler; wheel kit; straight stuffing horn. 5 hp, 3/60/220-440 volt. Built 2016. Serial# 128 5194. Previously used for meatballs and then transitioned to pizza dough then cookie dough.